Welcome to Interfast Group!
Welcome to Interfast Group!
 

PRODUCTS

SELF DRILLING
 
 
HEX WASHER HEAD SELF DRILLING SCREWS ZINC PLATED
SIZE
HEX DRIVE SIZE
DRILL POINT
QTY / CTN
WT / CTN
PART#
6 x 3/8 1/4 #2 20M 44 200H2
6 x 1/2 1/4" #2 15M 40 202H2
6 x 3/4 1/4 #2 10M 32 204H2
6 x 1 1/4" #2 10M 39 206H2
8 x 1/2 1/4 #3 10M 33 210H3
8 x 5/8 1/4" #3 10M 38 212H3
8 x 3/4 1/4 #3 10M 42 214H3
8 x 1 1/4" #3 8M 45 216H3
8 x 1-1/4 1/4 #3 8M 37 218H3
8 x 1-1/2 1/4" #3 5M 35 220H3
8 x 2 1/4 #3 3M 29 221H3
10 x 1/2 5/16" #3 8M 38 228H3
10 x 5/8 5/16 #3 8M 41 230H3
10 x 3/4 5/16" #3 8M 47 232H3
10 x 3/4 5/16 #3 8M 48 232HH3**
10 x 1 5/16" #3 5M 35 234H3
10 x 1-1/4 5/16 #3 3M 25 236H3
10 x 1-1/2 5/16" #3 3M 29 238H3
10 x 2 5/16 #3 2M 25 242H3
10 x 2-1/2 5/16" #3 1M 16 246H3
10 x 3 5/16 #3 1M 18 250H3
12 x 3/4 5/16" #3 5M 41 254H3
12 x 1 5/16 #3 4M 39 256H3
12 x 1-1/4 5/16" #3 3M 33 258H3
12 x 1-1/2 5/16 #3 2.5M 32 260H3
12 x 2 5/16" #3 2M 33 264H3
12 x 2-1/2 5/16 #3 1M 20 268H3
12 x 3/4 5/16" #3 1M 28 272H3
12 x 4 5/16 #3 1M 31 276H3
14 x 3/4 3/8" #3 4M 46 278H3
14 x 1 3/8 #3 3M 42 280H3
14 x 1-1/4 3/8" #3 2.5M 41 282H3
14 x 1-1/2 3/8 #3 2M 37 284H3
14 x 2 3/8" #3 1M 23 286H3
14 x 2-1/2 3/8 #3 1M 28 288H3
14 x 3 3/8" #3 1M 3 290H3
14 x 3-1/2 3/8 #3 1M 30 292H3
14 x 4 3/8" #3 500 22 294H3
14 x 4-1/2 3/8 #3 500 24 295H3
14 x 5 3/8" #3 500 26 296H3
14 x 6 3/8 #3 500 31 298H3
14 x 7 3/8" #4 400 28 299H4
14 x 8 3/8 #4 300 24 300H4
12-24 x 7/8 5/16" #4 4M 36 296H4
12-24 x 1-1/4 5/16 #5 2M 23 298H5
12-24 x 2 5/16" #5 2M 33 264H5
14 x 7/8 5/16 #2 3M 29 279H2

 

#6 Metal to metal fastening, used in light-gauge sheet metal applicaitons. recommended drive speed of 2,500 rpm. #8 Metal to metal fastening, use in light sheet meatl and light-guage steel framing, Very common in H.V.A.C. ductwork assembly. Recommended drive speed of 2,500 rpm. #10 Metal to meatl fastening, use in medium guage metal framing. commonly use by metal framing and H.V.A.C. contractors and fabricators. Can attach 12-20 gauge steel. Recommended drive speed of 2,500 rpm. #12 metal to metal fastening, used in sheet metal to attach to purlins and channels. Can attach 12-20 guage steel. Recommended drive speed of 2,000 rpm. #14 Metal to metal fstening, used for heavy-gauge metal attachment. Attaches 8-18 guage metal. Recomended drive speed of 1,750 rpm.
Welcome to Interfast Group!

Home | About Us | Products | Tech Data | Policy | Contact Us

Copyright © 2021 Interfast Group. All rights reserved.